techniques and process of making artificial marble

marble stone has several kinds of colors, most people were more familiar with the marble stone and beige hues tend to brown.
marble rock fans will certainly remove the contents of his pocket just to meet the delights of marble stone, what if you want extremely difficult to obtain, may be able to expencive or availability will be the desired marble stones are not available, for example wants pillars with a height of 40cm diameter 4m of 12 poles, is sufficient availability of marble stone for it. . .? and how long does it take? ,
therefore made ​​a replica or imitation of marble stone with paint.
The following are some steps to make artificial stone Mamer with paint:
- Concrete pillars that have been mashed with a layer of cement and then sprayed with a base color / epoxy in accordance with the color of the youngest of marble stone, Tear off the paper lengthwise with a width of between 2 to 6 cm is used as a mold line on the sternum cracks color marble stone color sprayed older of the basic colors, after spraying cracks and then use the line that has been folded gauze between 3 to 5 not to crease the folds tightly closed pores in gauze, use gauze fibers such as color printing, color spray-can be the same or older than color fracture line, repeat the spraying continues with a variety of fiber color brown to quite fill the empty space on the pillars, smooth spray color on the color that has not been evenly distributed in accordance with the flow. make a line of small cracks with black so as if it cracks in some parts of the pillar and then the last step to finish / clear / varnish to polish and add to the beauty of artificial stone Mamer. . . .
good luck.